<% pathinfo=trim(Request.ServerVariables("Path_info")) select case lcase(pathinfo) case "/introduction/","/introduction/default.htm" pageNum=1 case "/product/","/product/default.htm" pageNum=2 subAct=1 case "/product/product02.htm" pageNum=2 subAct=2 case "/product/product03.htm" pageNum=2 subAct=3 case "/product/product04.htm" pageNum=2 subAct=4 case "/product/product05.htm" pageNum=2 subAct=5 case "/product/product06.htm" pageNum=2 subAct=6 case "/contact/","/contact/default.htm" pageNum=3 end select %>
Home Product Specifications
MODEL Dia
(INCH)
(mm) MIN
L.P.M
AVERAGE
L . P . M
MAX
L . P . M
B3HK 2"
50A 120 130 140
B5HK 2 1/2" 65A 180 200 220
B9HK 3" 80A 240 270 300
C12HK 4" 100A 490 540 590
C20HK 5" 125A 740 820 900
C28HK 6" 150A 1,010 1,220 1,340
C50HK 8" 200A 2,130 2,370 2,610
C78HK 10" 250A 2,920 3,240 3,560
D112HK 12" 300A 4,410 4,900 5,390
D153HK 14" 350A 5,630 6,260 6,880
D201HK 16" 400A 7,380 8,200 9,020
D254HK 18" 450A 9,330 10,370 11,410
D314HK 20" 500A 12,300 12,950 14,180
D380HK 22" 550A 14,890 15,670
17,160
D452HK 24" 600A 17,710 18,650
20,420
E530HK 26" 650A 20,800 21,890
23,970
E616HK 28" 700A 24,100 25,390
27,700
E709HK 30" 750A 27,800 29,140
31,910
E1017HK 36" 900A 39,870 41,970
45,960
E1256HK 40" 1,000A 49,220 51,810
56,730
E1809HK 48" 1,200A 70,880 74,610
81,700
F2290HK 54" 1,350A 89,700 94,420
103,390
F2827HK 60" 1,500A 110,740 116,570
127,640
F3421HK 66" 1,650A 134,000 141,050
154,450
G4071HK 72" 1,800A 159,500 167,860
183,810

- Size selections depend on flow rate(LPM)
- Reducer is to be used for adjustment when diameter of pipes and that of ACE-MAG unmatched
- Size selection by referring to the flow rate of the lines where ACE-MAG is to be applied
- Install at pump outlet
- Should be placed perpendicular to the direction of fluid flow
- Not workable in the fluid flow unless it is conductive
- The submicron particles(T.D.S.) settled in the storage tank should be regularly removed by blow down, sump flushing or bleed off to keep it maintain at 2,500 ppm
- Use of strainer is recommendable, if necessary